Home || News || Reviews || Articles || Contact || Store || Forums || Dumbass Database
Home
News
News Archive
Reviews
Articles
Contact
Store
Forums
Dumbass DB

"When they call the roll in the Senate, the Senators do not know whether to answer 'Present' or 'Not guilty.'"
- Theodore Roosevelt

TwistedMods.com
Canada Forums
Explosive Labs
FindProductReview
HardAvenue.com
IceTeks
Kirba
Legion Hardware
MaXit Mag
OCIA
Overclockers Club
RipNet-UK
Rizenet
ThinkComputers
Ultra X
ViperLair
Virtual Hideout
VoidedWarranty
Syndicate:
XML
Professional Patch Cables
Page 1 - How to create your own professional looking patch cables
Author: Dan Podhola (WebMasterP)
Date: January 21, 2002
Category: Guide
Options: Printable Version 12 pt Times New Roman 10 pt Times New Roman 12 pt Tahoma 10 pt Tahoma


Professional Patch Cables


Making professional looking patch cables is not a hard task. In fact, it is quite easy. All you really need is the right equipment and know where to start. This guide will show you what you need and how to make a good looking patch cable from start to finish.
What You'll Need
What You'll Need

What you'll need to start making professional patch cables is the following: CAT5 or CAT5e cable (at length desired), RJ45 connectors (also called plugs), RJ45 Boots, and RJ45 crimper (preferrable one that strips and cuts CAT5 cable as well). You can get these in various color schemes; this guide will be shown with black CAT5e Cable and black RJ45 boots. Just so you know CAT5e cable and CAT5 cable will both work on 10BT/100BT Networks. However, if you're running a Gigabit Network, you'll need the CAT5e.
Freshly Cut CAT5
Freshly Cut CAT5
Insert and Twist
Insert and Twist

Once you have your equipment, you can get started. The first step is to cut the CAT5 cable to desired length. Nothing special about this step, just make sure you make a pretty even cut on both ends of the cable. Next, you're going to want to strip the wires inch in and avoid cutting the inner wires (or stripping them). This is where a good crimper/stipper comes in (as seen above). All you have to do is stick the CAT5 in the stripper until it hits the stopper then squeeze the handle a little and twist the cable. Once you've done that, pull out the cable and you have yourself a perfectly stripped cable.
Stripped Just Right
Stripped Just Right
Close Up
Close Up

Now that we have the cable stripped, we need to seperate the individual wires so that they fit into the individual wire slots in the RJ45 head in the correct order.

Main Page
Sorting and Capping



Join Xtreme Tek's Mailing List


Copyright © 1999 - 2017 Xtreme Tek. All rights reserved.